Saber Force

Instructions & Troubleshooting 

(RGB models) 

Every single Saber that is sold through our store is checked and tested before it is sent out to the customer. 
If you find your new Saber is not working as intended there is most likely a very simple fix.

Please use the guide & videos below to troubleshoot the issue. If you still need help please feel free to contact us - support@lightsaberforce.com.au

Safety Warning

1) Not suitable for children under the age of 8.
2) Please use the Saber sensibly and do not use it to hurt people.
3) Do not use the Saber in or near water.
4) Please use the supplied charger or a 5V,1A charger.
5) Do not overcharge and charge unattended or leave charging overnight.

Specifications

1) Hilt Material: Aluminum Alloy
2) Blade Material: Removable PC
3) Colours: 12
4) Soundfonts: 12
5) Battery: 3000mah, 18650
6) Charging time: 2 - 4 hours Max
7) Warranty: 12 Months

Troubleshooting Guide (RGB Sabers Only)

Saber has no sound:  If the saber has no sound, this generally means that the saber is in mute mode. To re-activate the sound please make sure the saber is turned off. Next press the button to activate the saber then release your finger. Then press the button for 1 second (blue light will flash once) this will reactivate the sound. (Please see video below)

Saber has weak sound: If the sound coming from your saber sounds very weak, this generally means the volume is turned to low.  To turn the volume up please follow these steps. 

Saber Instruction Guide (RGB Models Only) 

How to power on and off (make sure the saber is charged first)

1) To awaken from deep sleep mode press and hold the button for 1 second.

2) To turn it off press and hold the button for 3 seconds.

3) To put the saber into deep sleep mode press and hold the button for 5 seconds.

How to change blade colours & sounds.

1) Saber must be turned off.

2) Then push and hold the button for 2 seconds, the saber will turn on and the blue light will flash twice. 

3) Release your finger as soon as the blue light flashes twice. This will then change the blade colour and soundfont. 

4) Repeat steps above to cycle through the different colours and sounds. 

Lightsaber effects (Saber must be turned on)

1) Blaster Sound:
Tap the button

2) Lock-up loop: Press the button for 1 second (blue light will flash once) then release your finger. Then press the button to activate lock up. Press it again to release the lock up effect. 

3) Flash on clash: The saber will automatically flash white and emit a sound when it hits another surface

4) Drag effects: Press and hold the button and hit the tip of the blade.